Microprism Light Guide
>>Flat Light Guide
>>Wedge Light Guide
>>Dual Mode Light Guide
>>Viewibg Area Expander Backlight
CCFL Lamps
>>Lamp Specification
>>Sample Quality Control Manual
Backlighting Components
This revolutionary Flat Collimator is developed to backlight displays requiring extremely high efficiency. It sends essentially all input light towards the viewer. Specially designed Flat Collimator light guide can be used to achieve dual mode (day/night vision) application. With the viewing area expanding technology, the Flat Collimator Backlight can illuminates essentially from edge to edge.
CCFL Lamps
BriteView technologies offers custom-made, high brightness, and long lifetime CCFLs. The lamps will be fully documented, and will be delivered in approximately 2-3 weeks after receiving the purchse orders.
CCFL Inventers
BriteView Technologies, Inc. design and produce high quality inverters/drivers for backlights. The inverter/driver units are custom made to satisfy customers special requirements. The inverter can be made to achieve high dimming ratio. Dimming control can be digital (push button), or analogue (use a potentiameter). A special dimming scheme with hybrid light source, CCFLs for high brightness and LEDs for very low output brightness, is particularly suitable for achieving a very high dimming ratio. Power supply and control for heating can also be included in the inverter/driver unit to warm up the lamps for low temperature operation. Optical and thermal sensors can also be incorporated in the inverter/driving unit to provide feed-back for thermal and inverter power control.
BriteView Technologies, Inc. design and produce special films/plates for backlights:
 |
Beam Angle Expander: This film/plate expands the divergent angle of backlights so that it is suitable for LCDs with a wide viewing angle. The films/plates can be made to increase the viewing angle in x, y, or both directions. Active area expander: This plate expands the viewing area of the backlight. This product is particularly suitable for backlight displays that have an extremely small border ares. |
BriteView Provides High Quality NVIS filters that satisfies military requirements. The filter reflects long wavelength red and infrared light as shown in the picture on the left.
The Custom made LED PC board is made from an Insulated Metal Subtract for heat management.
LED driver will be custom made for high efficiency, compact size, and high dimming ratio.